Beaver tail transporter trailers are manufactured in 3 weight ranges, 2 tonne, 2.6 tonne and 3.5 tonne gross and 3 lengths approx.. 14’, 16’ and 18’. All are supplied with 8’ long steel loading ramps and can be fitted with front drive over ramps that slide out from under the body. The photo above compares the rear ramp approach angles The nearest is a hydraulic tilt trailer PT56 with standard slide in ramps, the next using low approach extension blocks and the far trailer is a 355B with standard 8’ ramps.

Standard specification includes laser cut and punched outer floor sections with load strapping points, full road lights, front jockey wheel, spare wheel and carrier, rear loading legs and slide in 8’ steel loading ramps. A hand winch is standard unless drive over ramps are required.